ANALISA POSTUR KERJA TERHADAP RESIKO MSDS PADA PEKERJA BAGIAN PENCETAKAN BETON BLOCK DENGAN MENGGUNAKAN METODE RULA (Studi Kasus Pada CV. Beton Block Padang)
Abstract
Abstract
               The workers lift beton block two pieces at once in one appointment, the load is 18kg and lifted in a few seconds and in large quantities. Overnight the worker will dismantle the mold and lift the beton block as much as ± 1245 pieces per night. As mentioned above, with the influence of load and the amount of removal that many with job positions are not ergonomic, workers have several complaints after doing the work of unpacking and lifting beton block, This is evidenced by the recapitulation of the nordic body map questionnaire that shows the body part on workers in the printing station who experience the most pain when working are on the dimensions of the back, waist, upper arm (left and right), the forearm (left and right), left shoulder, right shoulder, left hand and right hand pain. Then the dimensions of the body that does not hurt at all are the upper neck body, lower neck, buttocks, left leg, right leg, right ankle and left foot. If this condition is not immediately corrected it will cause complaints musculoskeletal disorders (MSDs) are high on workers.
Â
Keywords: Work Posture, Nordic Body Map, Musculoskeletal Disorders, RULA
Â
References
ACGIH, 2007. Threshold Limit Value fo Physical dan Chemical Substances and Biological Exposure Indices, ACGIH-USA
Bridger,R. 2003. Intoduction to Ergonomics 2nd Edition. London and New York: Taylor and Francis.
ACGIH, 2007. Threshold Limit Value fo Physical dan Chemical Substances and Biological Exposure Indices, ACGIH-USA.
Arikunto, S. 2006. Prosedur Penelitian: Suatu Pendekatan Parktik. Jakarta: Rineka Cipta.
Astuti, D. Iyah, R. Analisa Pengaruh Aktivitas Kerjadian Beban Angkat Terhadap Kelelahan Muskuloskeletal. Universitas Sebelas Maret. Surakarta;2011.
Bridger, B., 1995, Introduction to Ergonomics, McGraw-Hill, Inc., Singapore.
Bridger,R. 2003. Intoduction to Ergonomics 2nd Edition. London and New York: Taylor and Francis.
Corlett, E. N.1992. Static Muscle Loading and the Evaluation of Posture, Edited By Wilson. J.R & Corlett, E. N., Eveluation of Human Work a Practicel Ergonomics Methodology, Tailor & Francis, PP: 542-570. London
Grandjean, E. 1993. Fitting the Task to the Man, 4th ed. Taylor and Francis Inc. London.
Humantech, 1989, 1995. Applied Ergonomics Training Manual 2nd Edition. Australia:Barkeley Vale.
Kroemer, K.H.E & Grandjean, E.1997. Fitting The Task to The Human, A textbook of Occupational Ergonomic. Fifth edition. Taylor & Francis Publisher.
Manuaba, A. 2000. Ergonomi Kesehatan Keselamatan Kerja. Dalam Wygnyosoebroto s & Wiranto, S.E:Eds. Processing Seminar Nasional Ergonomi PT. Guna Widya Surabaya.
McAtamney, L. & Corlett, E.N., 1993, RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics.
McMillan, James H, & Sally Schumacher. 2003. Research in Education. New Jersey: Pearson
NIOSH. 1997. Musculoskeletal Disorders and Workplace Factors: A Critical. Review of Epidemiologic Evidence for Work Related MSDs. NIOSH: Center for Disease Control and Preventation.
NIOSH. 2007. Simple Solutions: Ergonomics for Constrction Workers. NIOSH : Departement of Health and Human Services.
Nurmianto, Eko. 1996. Ergonomi: Konsep Dasar dan Aplikasinya. Edisi Pertama. Institut Teknologi Bandung: Penerbit Guna Widya.
Oborne, d. 1995. Ergonomic at Work. Chicester, UK. Jhon willey and Sons, Ltd.
OHSCO, 2007. Resource Manual for the MSD Prevention Guideline for Ontario. Occupational Health and Safety Council of Ontario: Musculoskeletal Disorders Prevention Series.
Occupational Safety and Health Administration (OSHA), 1997. Working Safely With Video Display Terminals. U.S.Department of Labor, 3092.
Occupational Health and Safety Council of Ontario (OHSCO) , 2007, Prevention Musculoskeletal Tool Box. Ontario, USA.
Pasaribu, I.L. & Simanjuntak, B., 1982. Pendidikan Nasional (Tinjauan Paedagogik Teoritis). Bandung: Tarsito
Pheasant, Stephen. 1986. Body Space, Anthropometry, Ergonomics and Design. Taylor and Francis. London-New York-Philadelphia.
Pulat, B. M. 1997. Fundamental of Industrial Ergonomics. USA: Waveland Press Inc.
Suhardi, Bambang. 2008. Perancangan Sistem Kerjadan Ergonomi Industri. Jilid 2. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan Departement Pendidikan Nasional.
Suma’mur, P.K. 1989. Higene Perusahaan dan Kesehatan Kerja. Cetakan 4, Penerbit PT. Gunung Agung, Jakarta.
Sutalaksana, I. 1979. Teknik Tata Cara Kerja. TI ITB. Bandung.
Sutalaksana, Iftikar. 1985. Pengukuran Kerja. TI ITB. Bandung.
Sutalaksana, dkk. 2006. Teknik Perancangan Sistem Kerja. ITB. Bandung.
Tarwaka, Hadi, Solichul dan Sudiajeng, Lilik. 1985. Ergonomi Untuk Kesehatan dan Keselamatan Kerja dan Produktivitas, UNIBA Press, Surakarta.
Tarwaka & dkk. 2004. Ergonomi Untuk Keselamatan, Kesehatan Kerja dan Produktivitas. UNIBA PRESS. Surakarta.
Tayyari, F., dan Smith J. L., 1997. Occupational Ergonomics: Principles and Aplikation, Chapman & Hall, London.
Waters, T. R.; Anderson, V. P.; Garg, A., Fine, J. 1993. Revised NIOSH Equation for the Design and Evaluation of Manual Lifting Task. National Institute for Occupational Safety and Health. Cincinnati.
Waters, T. R.; Anderson, V. P.; Garg, A. 1994. Application Manual For The Revised NIOSH Lifting Equation. US Department of Health and Human Service. Cincinnati.
Wicken, C.D et al. 2004. An Introduction To Human Factors Engineering. Prentice Hall. New Jersey
Wignjosoebroto, Sritomo. 1996. Tata Letak Pabrik dan Pemindahan Bahan. Surabaya: Penerbit GunaWidya.
Winarno Surakhmad, 1961, Metodologi Pengajaran Nasional, Bandung, C.V. Jemmars.
Winter, D. A. 1990. Biomechanics and Motor Control of Human Movement 2ed. John Willey & Sons.
