STUDI ANALISA INTENSITAS PENERANGAN PADA BANGUNAN GEDUNG DENGAN SOFTWARE DIALUX 4.13

Abstract

Lighting in the electrical system is the most important part of a building. Evenly illuminated in the room greatly affects the senses of human vision and comfort while in the room. To get a good lighting intensity in a building, good analysis is needed, so that the intensity of lighting in the room is evenly distributed. Analysis that refers to the 2001 SNI with predetermined equations and the presence of Dialux software can make it easier to visualize and analyze lighting in the room. In each room measuring 42 m2 used 8 units of TL lights consisting of 2 units of TL lights with 1 armature. However, 12 units of LED downlights will be needed. The calculation with the TL lamp equation is 2 x 36 watts with 5200 lumens, so the lux value obtained is 396.19 lux in each room. Comparisons were made with the calculation of 18 watt LED lights with 2300 lumens, so that the lux obtained in each room was 525.71 lux. In the hallway the building uses TL 2 x 36 watt lights with 5200 lumens, so lux obtained 99.04 lux with a comparison of 18 watt LED lights with 2300 lumen calculations obtained 262.85 lux. From the results of the calculation of 1 security in each of the 2 rooms of the 2 x 36 watt TL lamp power that is obtained at 576 watts, while the 18 watt LED light has a value of 432 watts.

Keywords: Itensity of Lighting, Dialux Software, Electrical Systems.