PENGUKURAN PRODUKTIVITAS DENGAN MENGGUNAKAN AMERICAN PRODUCTIVITY CENTER MODEL (APC) (Studi Kasus: Usaha Roti Aceng Bakery)
Abstract
Productivity is one of important factor that influence in increasing or decreasing of company development. The purpose of productivity measurement is to measure company performance and as baseline for company to make short term or long term planning. Usaha Roti Aceng is one of small industries that focus on food industry. The company never conducts productivity measurement, so that the current condition of company was unknown which was better or worse than previous years. The purposed of this study was to measure and analyze productivity of Usaha Roti Aceng by used APC (American Productivity Center) method. APC method measurement based on productivity inde, profitability index and price improvement index. Data that used for measurement was from year 2016, 2017 and 2018 with year 2016 as base period. Result of productivity index shows fluctuation which on 2017 increase about 3,89% and on 2018 decreased about -3,55% from based period. Profitability index pointed out that profitability increased every year, which on 2017 about 4,11% and on 2018 about 5,88%. Result of price improvement index also show that there was no improvement on 2017 abaout 1,00 and increased on 2018 about 0.11.
Keywords: Productivity, Profitability, Price Improvement, APC Method
References
Bakar, A., Suprianto, O., & Yuniati, Y, 2017, Usulan Peningkatan Produktivitas Berdasarkan Metode Mundel dan Apc di PT. Raffsya Media, Journal of Industrial Engineering Management, 2(2), pp.1-13.
Doeronto, Panji, A.Harwitasari, D.M Ikasari, 2016, Analisi Produktivitas dan Profitabilitas Produksi Sari Apel dengan Metode American Produktivity Center di KSU Brosen, Jurnal Teknologi dan Manjemen Agroindustri 5(3), pp.114-124.
Gasperz, Vincent, 1998, Manajemen Produksi Total, PT. Gramedia Pustaka Utama, Jakarta.
Gaspersz, Vincent, 2000, Manajemen Produktivitas Total, Strategi Peningkatkan Produktivitas Bisnis Global, PT. Gramedia Pustaka Utama, Jakarta.
Hadi, Y, R.Irawan, O.H.Kelana, 2018, Penigkatan Produktivitas UMKM Menggunakan Metode American Productivity Center, Jurnal Metris 19, ISSN:1411-3287, pp.7-18.
Handoyo. 2010. Analisis Produktivitas dengan pendekatan Metode American Productivity Center (APC) di PT. Panca Wana Indonesia Krian- Sidoarjo. Universitas Pembangunan Nasional “Veteran” Jawa Timur, Jawa Timur.
Kurniawan, C., Tjahyono, R., & Izzhati, D. N, 2017, Pemodelan dan Analisa Produktivitas Proses Pembekuan Produk Fillet Ikan Menggunakan Objective Matrix (OMAX)(Studi Kasus PT. Mandala Mulya Sakti Surabaya), Applied Industrial Engineering Journal, 1(2), pp.53-64.
Mubin, A., & Zainuri, S, 2012, Peningkatan Produktivitas Dan Kinerja Lingkungan Dengan Metode Green Productivity di PT. XYZ, Jurnal Teknik Industri, 13(2), pp.126-132.
Siagian, Sondang P, 2003, Teori dan Praktek Kepemimpinan, PT Rineka Cipta. Jakarta.
Sumanth, David J, 1985, Productivity Engineer and Management. McGraw-Hill Book Company, New York.
Sumanth, David J, 2000, Productivity Engineering and Management, McGraw Hill Book Company, New York.
Sinungan, Mochdarsyah, 1997, Produktivitas Apa dan Bagaimana, Bumi Aksara, Jakarta.
Sinungan, Mochdarsyah, 2005, Produktivitas Apa dan Bagaimana, Bumi Aksara, Jakarta.
