Analisis Statik Sistem Pemipaan Pengolahan Limbah Pabrik Baja Berdasarkan ASME B31.3

Abstract

A pipe is a way of the most efficient in transport liquids fluid from somewhere all the way the other. A system of piping commonly consisting of a combination of a pipe equipped with components such as valves, fleng, the corner, branching, a nozzle, reduser, support, isolation and others. In this research analysis was conducted the tension in piping system pipe with using software CAESAR II, where design pressure and temperature determined based on the standard  ASME B31.3. From the results of a simulation done by can be seen that the safe limit material of a pipe used to a system of waste processing piping steel mill against voltage inflicted as much as 50,4

Mpa to the limits of a voltage be as much as 275,4 Mpa. Theoretical calculations and by means of the simulation software gallic obtained in displacement stress ( SE ) as much as 3 %. So from the results of analsis piping system that was done using software CAESAR II safe in use at the time were operated