ANALISIS RISIKO KECELAKAAN & KESEHATAN KERJA MENGGUNAKAN JOB SAFETY ANALYSIS (JSA) DI LABORATORIUM PROSES PRODUKSI TEKNIK INDUSTRI
Keywords:
Risk Analysis, Work Accidents, Job Safety Analysis (JSA), Production Process Laboratory.Abstract
The purpose of this study is to analyze accidents and occupational health risks in the production process laboratory using the JSA (Job Safety Analysis) method. A production process laboratory is a complex working environment where various machines and equipment are used for various technical and production-related activities. The use of machines such as lathes, milling machines, drilling machines, grinding machines and welding machines poses a significant risk to the safety and health of workers. The JSA methodology is used to identify and assess potential hazards at each stage of work and determine appropriate control measures to reduce risks. The study begins by identifying the key laboratory work steps in the production process and the potential hazards associated with each machine and task. Risk assessments are then carried out using JSA to assess the likelihood and severity of each potential hazard to determine the value and level of risk. Control measures are then suggested based on the control hierarchy, from hazard removal, replacement, engineering, and management to the use of personal protective equipment (PPE). The study shows that some tasks, such as operating lathes and grinders, pose significant risks and require special attention in terms of safety procedures and risk management.References
Ade Sri Mariawati et.al. (2017). Analisis Penerapan Keselamatan Kerja Menggunakan Metode Hazard Identification Assessment (HIRA) Dengan Pendekatan Fault Tree Analysis (FTA). Journal Industrial Servicess Vol. 3 No 1, 293-300.
Anisa A Rahmadiana. (2016). Hazard Identification and Risk Assessment sebagai upaya mengurangi resiko kecelakaan kerja dan resiko penyakit akibat kerja dibagian Produksi PT Iskandar Indah Printing. Surakarta.
Anita Trisiana et.al. (2019). Assessment Resiko Kesehatan dan Keselamatan Kerja (K3) Menurut Variabel OHSAS Dengan Menggunakan Metode HIRA, HAZID, HAZOP (Studi Kasus: Proyek Pembangunan Ciputra World Phase 3, Surabaya). Jurnal Rekayasa Sipil dan Lingkungan, 28-37.
Al-Ahmad, A., & S., A. (1996). Assessment of Work Performance of Maintenance. New York: American Society of Civil Engineers.
Anton TJ, A. T., 1989. Occopational Safety and Health Management and Economic. Volume 22, pp. 183-192.
Bird, F. E., & Germain, G. L. (1990). Practicial Loss Control Leadership. Georgia: International Loss Control Institute.
CCOHS. (2001). Canadian Centre for Occupational Health and Safety.
Colling, D. A. (1990). Industrial Safety Management and Technology. New Jersey: Prentice Hall.
Dr. Edy Soetrisno, M. (2010). Manajemen Sumber Daya Manusia. Jakarta: Prenada Media Group.
Friend, M. A., & Kohn, J. P. (2007). Fundamental of Occupational Safety and Health. Plymouth: The Scarecrow Press, Inc.
Groover, M. P. (2012). Fundamentals of Modern Manufacturing: Materials, Processes, and Systems. USA: Willey Global Education.
Hartatik, I. F. (2014). Buku Praktis Mengembangkan SDM. Yogyakarta: FlashBooks.
Itasca. (2013). Injury Facts. National Safety Council.
Mawaddah, S. (2023). Analisis Faktor-Faktor yang Mempengaruhi Keselamatan dan Kecelakaan Kerja pada Karyawan dan Pengemudi. Journal of Health and Medical Research, 298-303.
Nafidah, L., 2011. Implementation Of Internal Control System On Avian PT. Avia Sidoarjo Viewed From The Quality Of Human Resources. journal.unipdu.ac.id, Volume I, p. 1. OHSAS. (2007). Occupational Health and Safety Management System. British Standards Institution.
Ramli, S. (2010). Petunjuk Praktis Manajemen Kebakaran. Jakarta: Dian Rakyat.
Reason, J. (2016). Managing the Risks of Organizational Accidents. New York: Taylor & Francis.
Ridje J, R., 2004. Kesehatan dan Keselamatan Kerja.
Ridley, J. (2006). Ikhtisar Kesehatan dan Keselamatan Kerja (Terjemahan). Jakarta: PT Gelora Aksara Pratama.
