PERENCANAAN STRUKTUR GEDUNG BERTINGKAT IV (STUDI KASUS SD THERESIA PADANG)
Abstract
Planning the construction of reinforced concrete building structure is a combination of structural elements such as plates, beams, columns, joists and cross bar, making it eligible residential eligibility is strong, safe and sturdy.Structure to be planned are building elementary school (SD) 4 floors and is located in the region of 6, which is reviewed by using the equivalent static load analysis of influence.
Planning SD 4-story building structure is reinforced concrete structures using the Construction, the quality of concrete fc '= 25 MPa. For reinforcement Ø12 quality BJTP ≤ 240 and Reinforcement> Ø12 quality BJTD 400. Calculation of the forces in the structure is calculated by using the program SAP 2000 v 12 with 2D structure modeling. Procedures and general provisions for the building planning refers to (SNI 03-2847-2002) Planning Procedure for Calculation of Concrete Structures and Building (SNI 03-1726-2002) Planning Method for Building Earthquake Resistance. Weeks to all floor slab thickness is 120 mm with reinforcement reinforcement Ø10 is used. Main reinforcement for the D16 and reinforcement beam are Ø10 stirrups while the main reinforcement for columns is D19 and reinforcement Ø10 stirrups.
Keywords: Reinforced Concrete Structures, building structures, case studies
References
Imran Iswandi, “Perencanaan Elemen-elemen Struktur SRPMK dan SDSK
berdasarkan SNI 03-2847-2002” , Jurnal HAKI, Bandung
Kusuma, G. dan Andriono. T. 1993. “ Desain Struktur Rangka Beton
Bertulang di Daerah Rawan Gempa, “ Erlangga, Jakarta,.
L. Wahyudi dan Syafril A. Rahim, 1999. “Struktur Beton Bertulang StandarBaru SNI T–15–1991–03”, Jakarta. PT. Gramedia Pustaka Utama.
Panitia Teknik Konstruksi dan Bangunan, 2002 “ Tata Cara Perencanaan
Ketahanan Gempa untuk Bangunan Gedung (SNI 03-1726-2002). “ Badan Standarisasi Nasional, Puslitbang Pemukiman, Bandung Apr.2002, 63 hal.
Panitia Teknik Konstruksi dan Bangunan, 2002 “ Tata Cara PerencanaanStruktur Beton untuk Bangunan Gedung (SNI 03-2847-2002). “ Badan Standarisasi Nasional, Puslitbang Pemukiman, Bandung Apr.
PP, 2002 “ Pengenalan SAP 2000 ” Training Komputer, Jakarta
Purwono, R. & Tavio, “ Evaluasi Cepat Sistem Rangka Pemikul Momen
Tahan Gempa “, ITS Press, Surabaya, 2007
Purwono, R., 2005“ Perencanaan Struktur Beton Bertulang Tahan Gempa “,ITS Press, Surabaya
R.Park & T. Paulay, “ Reinforced Concrete Strukcture”, John Wiley and Sons, Ins, 1975.
Schueller Wolfgang. 2001 “ Struktur Bangunan Bertingkat Tinggi “, Refika Aditama, Bandung,.
Tavio, dan Kusuma, B. “Desain Sistem Rangka Pemikul Momen dan DindingStruktur Beton Bertulang Tahan Gempa”,ITS Press, Surabaya, 2009.
W.C. Vis dan Gideon Kusuma, 1993. “ Dasar – Dasar Perencanaan BetonBertulang Berdasarkan SK SNI T–15–1991–03 “ Seri Beton 1, Jakarta. Erlangga.
W.C. Vis dan Gideon Kusuma, 1993. “Grafik Dan Tabel perhitungan BetonBertulang Berdasarkan SK SNI T–15–1991–03 Seri Beton 4 “, Jakarta. Erlangga.
